PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
INTRODUCTION
Thank you for purchasing JDVD768. Unpack the unit and make sure all the accessories are put
aside so they will not be lost. We recommend that you retain the original carton and packaging
materials for future use, should you transport or ship the unit in the future.
7” Wide Screen Portable DVD / MPEG4 Player with USB
•
•
•
Portable DVD player with 7” TFT wide screen LCD
Compatible with NTSC / PAL system
USB, SD/MMC/MS card slot for digital audio and video playback (SDHC cards not
supported)*
•
•
•
•
•
•
•
Audio and video output
Stereo headphone jack
Rechargeable battery
7” Wide Screen Portable DVD / MPEG4 Player
with USB
Built-in stereo speakers
Multiple OSD / menu / subtitle / audio languages
Repeat playback
Playable media: DVD / VCD / MPEG4 / MP3 / JPEG / Audio CD / CD-R / CD-RW /
DVD±R / DVD±RW / Kodak picture CD
In the Box
•
•
•
•
•
Main unit
Remote Control
AC Adapter
A/V Cable
Warranty card
*Not all sizes and brands of cards supported.
ABOUT DISC ERROR
This compact disc player has built-in error compensation circuits to correct for minor defects in
a disc. There are limits, however, to the amount of correction available. In some cases, the
DVD player may skip some tracks, or parts of tracks, on a disc during disc play. This problem
may be caused by defects (such as scratches) in the disc being played, which are too large for
the error compensation circuits to handle. If you encounter this problem, try a new disc before
having the unit serviced. If the DVD player operates normally, the skipping problem is probably
due to a defective disc.
INSTRUCTION MANUAL
JD-VD768
Please read this manual carefully before operating and
save it for future reference.
Note: Only the above types of discs can be played on this unit.
1
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
GETTING STARTED
GETTING STARTED
COMPATIBILITY
Location of Controls
DVD VIDEO
Multi-angle
AUDIO CD
Subtitle choices
Audio choices
TV Aspect Ratio
MPEG4 VIDEO
MP3 CD
Kodak Picture CD
Dolby® Digital
MPEG4
This product incorporates copyright protection technology that is protected by method claims of
certain U.S patents and other intellectual property rights owned by Macro vision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by
Macro vision Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macro vision Corporation. Reverse engineering or disassembly is
prohibited.
1. LCD screen
13. NEXT button
14. PLAY button
15. STOP button
2. Right speaker
3. Left speaker
4. Disc cover
16. Charge indicator
17. Remote control sensor
18. POWER ON / OFF switch
19. DC 12V input
5. OPEN disc button
6. SETUP button
The product complies with the Kodak Picture CD format and will display Kodak Picture CDs.
The “Kodak Picture CD Compatible” logo is a trademark of Eastman Kodak Company and is
used with the permission.
7. MENU button
8. LCD ON / OFF button
9. DIRECTION (W / S / T / X) buttons
10. SOURCE button
11. PAUSE button
12. PREV button
20. Headphone jack
21. AV output
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
22. VOLUME dial
trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992–1997 Dolby
23. USB input
Laboratories. All rights reserved.
4
24. CARD slot
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
GETTING STARTED
GETTING STARTED
Location of Controls on the Remote Control
Changing the Remote Control Batteries
Place the remote control on an even surface and insert the supplied button cell into the remote
control as follows.
1. Push the button towards left
2. Pull the battery loader out
3. Insert the battery into the receptacle Make sure
The polarity matches the marks inside the component.
4. Insert the receptacle into the remote control.
Cell data
Battery type: 1x CR2025, 3 V
Service life: approximately 1 year (for normal use and room temperature)
jWIN
Using Of Remote Control
Point the remote control towards the main unit when operating. The remote control works best
at a distance less than 5 m and at an angle of up to 30º to the front of the unit. No obstacles
may stand in the way between remote control and infrared sensor and do not place the remote
control in direct sunlight. If the remote control unit fails to work even when it is operated near
the player, replace the battery.
1. A-B REPEAT button
2. PROG/REPEAT button
3. 0-9 Number buttons
4. SETUP button
5. GOTO button
10. DISPLAY button
11. ANGLE / AUDIO button
12. TITLE / SUBTITLE button
13. MENU / ZOOM button
14. STOP / SLOW button
15. Direction buttons (
16. REV button
Notes on batteries
If the remote control is not used for a long period of time, please remove the battery from the
compartment.
6. FWD button
)
Do not heat batteries or dispose of them in fires. Do not dismantle, deform or modify batteries.
7. NEXT button
8. PREV button
17. ENTER button
9. SOURCE button
18. PLAY / PAUSE button
Connecting the DVD player
· The DVD player, the television set and any other
electric devices to be connected to the DVD player
must be switched off and disconnected from the mains.
·Observe the color coding when connecting audio
and video cables.
Note:
- Long press 2, 11, 12, 13, 14 will activate the functions marked lower on these buttons
(PROG, ANGLE, TITLE, MENU, SLOW).
- Short press 2, 11, 12, 13, 14 will activate functions marked higher on these buttons
(REPEAT, AUDIO, SUBTITLE, ZOOM, STOP).
1 .Connecting to a television set Audio/video
Connectors Using the audio/video cable, connect
the DVD player to the A/V inputs of the television
set as shown in the illustration.
7
6
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
GETTING STARTED
GETTING STARTED
Connecting the DVD player- continued
Navigating the Setup Menu
2 .Connecting headphones
In the setup menu, there are setup pages categorized as following: LANGUAGE, VIDEO and
MISC. Each setup page is composed of the several setup options corresponding to each
category.
Connect the headphones to the headphone jack on the right side of the device. The
loudspeakers are automatically deactivated.
Caution: Excessively high volume can damage your hearing. Turn the volume down before
connecting the headphones and then turn the volume up to a moderate level.
Language Setup
3 .Power supply unit
The DVD player is delivered with a power supply unit. Connect the power supply cable to the
DC 12V IN jack on the right side of the device as shown below. Connect the power plug to an
earthed socket.
Note: Turn off the DVD player before you unplug the mains cable from the socket.
Rechargeable battery pack
A rechargeable lithium ion polymer battery is built in your portable DVD player. Fully charge the
battery before you use the device for the first time. Normally it takes about 4 hours for the
battery to be charged. When the rechargeable battery is fully charged, you can operate the
device with it for about 1.5 hours. Fully charge the battery when it will not be used for an
extended period of time.
1. LANGUAGE: Used to set the language for the On-Screen Display (OSD). This unit
supports ENGLISH, FRENCH, SPANISH, and PORTUGUESE.
Notes on using rechargeable batteries
·When using a new rechargeable battery, fully charge it prior to use.
·Use rechargeable batteries only in temperatures between 0℃ and 40℃. Do not expose
rechargeable batteries to high temperatures or direct sunlight.
2. SUBTITLE: Used to select the subtitle language. The correct performance of this option
depends on the subtitle contents supported by a DVD. If you select a language, which isn’t
supported by a DVD, this unit will use the default subtitle language of the DVD.
· Do not throw the battery into water or fire.
· Ensure adequate air circulation around the device. Do not place the device on soft furniture,
carpets or other materials while in operation, as this may restrict the air from properly circulating
around the device.
3. MPEG4 Subtitle: Choose different MPEG4 subtitle encoding options.
4. AUDIO: Used to select the audio language. The correct performance of this option
depends on the audio contents supported by a DVD. If you select a language, which isn’t
supported by a DVD, this unit will use the default audio language of the DVD.
·Do not short-circuit the contacts of a rechargeable battery.
·Do not disassemble the rechargeable battery.
·When switched off, the indicator lamp will stay red when charging the battery and the
indicator lamp will display yellow once the charging has finished.
· When the state of charge reaches a low level, the WARNING LOW BATTERY symbol is
displayed on the LCD screen. A few minutes later the DVD player turns off automatically.
5. DVD Menu: Used to choose the film’s menu language options. Follow the operating
instructions in DVD MENU Setup in combination with the desired option
Notes
Please Charge the battery with the device switched off. This will shorten the charging time and
extend the life of the battery.
Charge the battery fully first use.
9
8
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
GETTING STARTED
GETTING STARTED
Navigating the Setup Menu
Navigating the Setup Menu
Video Setup-continued
MISC SETUP
Use Default Settings: Reset setup data to factory default and re-load disc.
Video Setup
Screen saver: Enable/Disable screen saver function.
1. ASPECT RATIO: Choose 4:3LB, 4:3PS, 16:9
a. 4:3PS / 4:3LB: Choose this setting when your DVD player is connected to a normal
ratio TV. If this aspect ratio is chosen and the entire TV screen is used, parts of the
picture on the left and right will be cut off.
b. 16:9: Choose this setting if you have a wide screen TV. Choosing this aspect ratio
on a standard screen may distort the images due to vertical compression.
Note: The aspect ratio depends on the recorded disc format. Some discs may not display
images on the chosen aspect ratio. For example: if a disc recorded in 4:3 format is played on a
wide screen TV, black bars will appear on the left and right sides of the screen. Please adjust
the screen setting depending on both the type of TV and the recorded material on the disc.
2. TV SYSTEM: This portable DVD player supports NTSC, and PAL TV systems. The screen
may blink and become colorless when the wrong system is selected. For more information,
please refer to the user’s manual for your TV set.
3. SMART PICTURE:
Adjust display effect for video output:
Standard: default effect.
Bright: internal setting for bright view effect.
Soft: internal setting for soft view effect.
Dynamic: Users adjust brightness, contrast, color etc.
10
11
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
OPERATIONAL INSTRUCTIONS
OPERATIONAL INSTRUCTIONS
[0 – 9] Buttons on the Remote Control
These buttons are used to input the time, as well as title, chapter and track numbers.
When a numeric item is displayed on the screen, press the 0-9 keys to select the desired entry,
and press the [ENTER] button to confirm.
[NEXT]
While playing back a DVD, CD or VCD, press the [NEXT] button to skip to the next chapter or
track.
When a VCD is playing (with PBC off), press the 0-9 keys to select a track directly.
Note: Refer to the [MENU] button section for PBC operation.
[REPEAT]
Each short press of the [PROG / REPEAT] button on the remote control will change the repeat
[W/S/X/T] Direction Buttons
Press the [W/S/X/T] buttons to move the selected bar or cursor on any menu to your
selection.
mode.
During VCD, CD playback, there are three modes: repeat Single, repeat ALL and Off.
During DVD, playback, there are three modes: Repeat Chapter, Repeat Title and OFF.
Note: Refer to the [MENU] button section for PBC operation.
[LCD ON / OFF] Button on the Main Unit
Turn off / on the LCD. Use this function when LCD is not necessary (ie. when listening to
music) to save battery life.
[ZOOM]
While playing back a DVD, short press the [MENU / ZOOM] button on the remote control to
[SOURCE] button
Toggle between available media sources (DVD, USB, SD / MMC / MC card).
zoom in or out the image. This function differs depending on the type of disc.
[AUDIO]
[ENTER]
Press the [ENTER] button on the remote control to confirm your selection.
During DVD/SVCD playback, short press the [ANGLE / AUDIO] button on the remote control to
select different audio languages.
[PLAY/ PAUSE]
During VCD/CD/MP3 playback, the [ANGLE /AUDIO] button acts as L/R key to switch
LEFT/RIGHT/MIX/STEREO.
Press the [PLAY/PAUSE] button on the remote control or the [PLAY] button on the main unit to
play back a disc in the stop mode.
Press the [PLAY/PAUSE] button on the remote control or the [PLAY] button on the main unit to
resume the playback in the pause mode.
While playing back a disc, press the [PLAY/PAUSE] button on the remote control to pause. To
Resume the playback, press the [PLAY/PAUSE] button again.
[SUBTITLE]
While playing back a DVD, short press the [TITLE / SUBTITLE] button on the remote control to
turn on the subtitle and to select the language for the subtitle. This function depends on the
DVD.
[STOP]
While playing back a DVD, CD or VCD, press the [STOP] button on the main unit once to stop
the playback.
[DISPLAY]
To resume the playback at which you stopped, press the [PLAY/PAUSE] button on the remote
control or the [PLAY] button on the main unit. Press the [STOP] button twice in the playback
mode to completely stop.
While playing a DVD, press the [DISPLAY] button on the remote control once to see the
playback information. This function depends on the disc type.
Press the [DISPLAY] button again to see other additional information.
[FWD]
While playing back a DVD, CD or VCD, press the [FWD] button on the remote control to play
back the video or audio contents fast forward. Once you press [FWD] button, the disc will play
at different speed.
[GOTO]
For DVDs, press this button to choose the desired title and chapter and search the desired title
Press the [PLAY/PAUSE] button on the remote control or the [PLAY] button on the main unit to
resume the normal playback.
time and chapter time.
For Super VCDs, VCDs, or CDs, press this button to search the desired disc time and track
time and choose the desired track.
[REV]
While playing back a DVD, CD or VCD, press the [REV] button to play back the video or audio
contents fast backward. Once you press [REV] button, the disc will play at different speed.
Press the [PLAY] button to resume the normal playback.
Notes: During VCD playback, the PBC mode must be set to OFF.
[PREV]
While playing back a DVD, CD or VCD, press the [PREV] button to skip to the previous chapter
or track.
12
13
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
OPERATIONAL INSTRUCTIONS
ADVANCED FEATURES
[SETUP]
Playing MP3 / WMA / MPEG4 Files
Press the [SETUP] button to enter the setup mode. In the setup mode, you can set up the
When an MP3 / WMA / MPEG4 files are loaded, a directory structure will display as shown
Language settings, video setting, Misc settings.
here:
[MENU]
During DVD playback, press the [MENU] button on the main unit or long press the [MENU /
ZOOM] button on the remote control to display the disc menu of the current title.
During VCD/SVCD playback, press the [MENU] button on the main unit or long press the
[MENU / ZOOM] button on the remote control to control PBC ON/OFF.
Note: This function is subject to the disc.
[TITLE]
While playing back a DVD, long press the [TITLE / SUBTITLE] button on the remote control to
display the DVD title menu or play back the first title when the DVD disc doesn’t support the title
menu.
Note: This function depends on the disc type.
[ANGLE]
Use the [W/S/T/ X] buttons to choose the root directory and press the [ENTER] button enter
the sub-directory. Press the [W/S/T/ X] buttons to choose the desired track and press the
[ENTER] or [PLAY] button to enjoy the music or movie.
While playing back a DVD, long press the [ANGLE / AUDIO] button on the remote control to
view the scenes from the different camera angles. To go back to the normal playback, long
press the [ANGLE / AUDIO] button repeatedly until the angle function is turned off. A DVD
must support the different angle view to activate this function.
[PROG]
The Program playback option allows you to enter the order in which the chapters or tracks will
be played, up to 12 maximum.
1. Long press the [PROG / REPEAT] button on the remote control to display the Program
Menu. The cursor will highlight the chapters or tracks.
2. Move the cursor and use 0-9 keys to select the desired entry.
3. Use the [W / S / T / X] buttons to highlight the “PLAY” item and press the [ENTER]
button. The chapters/tracks will play in the programmed order. Playback stops once all
tracks have been played.
4. During Program playback, if the [PROG / REPEAT] button is pressed, the programmed
order and contents will display and playback will stop.
5. To clear programmed order, use the [W / S / T / X] buttons to highlight the “CLEAR
program items and press the [ENTER] button to modify the programmed order.
6. Press the [STOP] button to stop the program playback, press the [STOP] button twice or
the [OPEN/CLOSE] button to cancel the program playback.
Note:
Use the [W/S/T/ X] buttons and select the
the previous menu.
icon and press the [ENTER] button to return to
Filter: Allows selecting the categories of files displayed in the browser list.
This selection is done among the 3 categories: Audio, Photo and Video.
Repeat: To switch different repeat playing mode
Mode: Select different playing mode
- Long press [PROG, ANGLE, TITLE, MENU, SLOW ] will activate the functions marked
lower on these buttons.
- Short press [REPEAT, AUDIO, SUBTITLE, ZOOM, STOP] will activate functions marked
higher on these buttons.
Normal: Shuffle mode is cancelled
15
14
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
ADVANCED FEATURES
ADVANCED FEATURES
Playing MP3 / WMA / MPEG Files-continued
USB interface
Shuffle: Shuffle mode enabled. When playback reaches the end of the current chapter/track,
playback jumps to a random chapter/track. As the end of each chapter/track is reached,
another random chapter/track will be played until all tracks/chapters have been played or the
Shuffle mode is cancelled by toggling to a different Mode Option
Connect external device firsthand press the [SOURCE] button until you switched into USB
mode.
1. Connect the deviceto the power supply.
2. Switch the device on
Music Intro: In this mode, the media will play 10 seconds then skip to next track
Edit Mode: To enable programmed playback mode. When you select the mode, press LEFT
[W] Direction button to directory and press the [ENTER] button to choose the desired track and
press Add to program to start program playback.
3. Insert the USB memory stick into the USB port
4. Press the [SOURCE] button.
5. Use the [W / S / T/ X] buttons to select USB and confirm by pressing [ENTER]
Program view: Display program track
Brower view: Display track directory
Prior to connecting the device, make sure that the USB memory stick contains JPEG,
MP3 or WMA or MPEG4 files. You can use the SD card slot in the same way
Add to program: To choose the track press Add to program to add the track of the program
play directory.
Clear program: In the complete stop state (press the [STOP] button twice); choose the track
press Clear program to delete the track of the program play directory.
Please refer to section “Playing MP3 / WMA / MPEG4 Files” for more playback information.
3-In-1 Card Reader Function
This unit has a 3-in-1 card slot. You can insert (MMC, SD, MS) three kinds of cards with
Displaying Picture CDs
A Picture CD has a director similar to the display below.
the card port interface. After inserting a card and pressing the [SOURCE] button to choose
CARD mode to play the MP3 / WMA music or MPEG4 movie and JPEG files, all the
functions are the same as” Playing MP3 / WMA / MPEG4 Files”
.
NOTE:
When using the USB or CARD function. Please insert in the correct direction, to avoid
corrupting the stored files.
Use the [W / S / T/ X] buttons to choose the root directory, pressing the [ENTER] button to
enter the sub-directory. Use the [W / S / T/ X] buttons to choose the desired picture and press
the [ENTER] or [PLAY] buttons to view the picture.
To ROTATE the images use the [W / S / T/ X] buttons when in Picture Display mode.
16
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
CARE AND MAINTENANCE GUIDES
TROUBLESHOOTING GUIDE
Handling a Disc
Please use the problem-solving measures described here before contacting Customer Support.
Turn off the DVD player immediately as soon as you suspect a malfunction. Unplug the power
plug and check whether the DVD player is unusually warm or if smoke is rising from it.
•
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to
contact with the shiny, unprinted side of the disc.
•
•
Do not attach adhesive tape, stickers etc., to the disc label.
Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive
cleaners to clean the disc. If necessary, use a CD or DVD cleaning kit.
If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged
(scratched).
•
DVD player does not work
o
o
o
o
Disc cover is not closed. Close the disc cover.
•
•
•
•
No disc inserted. Please insert disc.
Disc is dirty or deformed. Clean disc or insert another disc.
Regional code of the player does not match the regional code of the disc. Purchase a
disc with the proper regional code.
When cleaning the disc, wipe in straight lines from the centre of the disc to the edge of the
disc. Never wipe in circular motions.
To remove a disc from its storage case, press down on the centre of the case and lift the
disc outs, holding it carefully by the edges.
o
There is moisture on the lens. Remove the disc and turn off the DVD player for at
least two hours.
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft
cloth. Unlike conventional records, compact disc have no groove to collect dust and
microscopic debris, so gently wiping with a soft cloth should remove most particles.
•
•
No sound
o
o
o
o
The player is not properly connected. Check that all connections are correct.
Headphones are connected (speaker off). Disconnect headphones.
DVD sound settings are incorrect. Check that the sound settings are correct.
Disc is dirty or deformed. Clean disc or insert another disc.
No video
o
LCD screen is off or in incorrect video mode. Turn on the LCD screen and / or set
correct video mode.
o
The player is not properly connected. Check that all connections are correct.
•
•
Poor video and / or audio quality
Disc is dirty or deformed. Clean disc or insert another disc.
Repeated playback of one section
o
Cleaning the Unit
•
•
•
•
To prevent fire or shock hazard, disconnect your unit from the AC power source when
o
o
Repeat mode is set ON. Exit the repeat mode.
cleaning.
Disc is dirty or deformed. Clean disc or insert another disc.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture,
Use caution when cleaning and wiping the plastic parts.
•
Remote control does not work
o
o
o
o
There is an obstacle between the remote control and the player. Remove the
obstacle.
If the cabinets become dusty wipe them with a soft dry dust cloth. Do not use any wax or
polish sprays on the cabinets.
The remote control is not pointed directly at the player. Point the remote control
directly at the player.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft
cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or
polishes as these will damage the finish of your unit.
The remote control battery is improperly installed. Check that the battery matched the
polarity marked in the battery compartment and insert the battery correctly.
The battery power is too low or is empty. Insert a new battery.
Caution: never allow any water or other liquids to get inside the unit while cleaning.
Other possible causes for problems:
Static discharges or other external interferences can cause the DVD player to malfunction.
When this happens, disconnect the power plug from the mains socket and plug it back in.
If the problem persists, disconnect the device from the mains again and contact Customer
Service or a repair shop.
18
19
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
USER SAFETY GUIDE
USER SAFETY GUIDE
IMPORTANT SAFETY INSTRUCTIONS-Continued
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR
SPLASHING WATER AND THAT NO OBJECT FILLED WITH LIQUIDS SUCH
AS VASES SHALL BE PLACED ON APPARATUS.
•
•
15. Grounding or Polarization – This product may be equipped with a polarized alternating-
current line plug (a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is
intended to alert the user to
the presence of unisulated
“dangerous voltage” within
the product’s enclosure that
m a y b e o f s u f f i c i e n t
magnitude to constitute a
risk of electric shock to
people.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
WARNING: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER-SERVIC-ABLE PARTS
INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
Alternate Warnings – This product is equipped with a three-wire grounding-type plug, a
plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet.
This is a safety feature. If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
grounding-type plug.
16. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating, and these openings must
not be blocked or covered. The openings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
17. The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
20
21
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
USER SAFETY GUIDE
USER SAFETY GUIDE
FCC NOTICE TO A USER IN USA
CLEANING
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Always disconnect unit from power supply before attempting to
clean it. Use soft cloth moistened with soapy water, and wipe
gently. Do not use solvents or abrasive materials.
LASER SAFETY
This unit utilizes laser technology. Only a qualified professional
should remove the cover or attempt to service this device, due to
possible eye injury.
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
CAUTION – CLASS 1 LASER PRODUCT
Use of controls adjustments and/or performance of procedure other
than specified herein may result in hazardous radiation exposure.
•
Consult the dealer or an experienced radio / TV technician for help.
DANGER
FCC RULES
Invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam. CAUTION: HAZAROUS LASER
RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that
this device does not cause harmful interference.
Note: Do not make changes or modify the device in any way. Changes or modifications
not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
YOU CAN HELP TO PROTECT THE ENVIRONMENT!
Please remember to respect the local regulations: Hand in the non-working
electrical equipment to an appropriate waste disposal center.
IMPORTANT NOTES ON HEARING
Your hearing is very important to you and to us, so please take care when operating this
equipment. We strongly recommend you to follow the guideline below in order to prevent
possible damage or loss of hearing.
FOR USED BATTERIES
Disposed of the used batteries properly. Please follow the local regulations for
the battery disposal.
If you continuously listen to the loud sounds, your hearing will adapt to continuous loud sounds
and will give you the impression that the volume has been reduced. What seems normal to you
may in fact be harmful. To guard against this BEFORE YOUR HEARING ADAPTS, set the
volume at a low level and slowly increase the volume level until you can hear comfortably and
clearly without distortion. Damage to your hearing is accumulative and is irreversible. Any
ringing or discomfort in the ears indicates that the volume is too loud. Once you have
established a comfortable listening level, DO NOT INCREASE THE VOLUME LEVEL
FURTHER.
In the use of headphones, please take more attention. Hearing experts say that listening to a
loud music can damage your hearing, especially when listening to music with headphones.
23
22
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
USER SAFETY GUIDE
SPECIFICATIONS
•
•
TV System: NTSC / PAL
LCD Panel
IC NOTICE TO A USER IN CANADA
Since digital circuitry may cause interference to other radio or television tuners nearby, switch
this unit off when not in use or move it away from the affected radio/television tuner.
o
o
Aspect Ratio: 16:9 / 4:3
Diagonal Size: 7”
•
•
Connectivity
o
o
o
o
o
AV output
3.5mm stereo headphone jack
Mini USB port
SD/MMC/MS card slot
Power input jack
NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These
limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television operation (which can be determined by turning the equipment off), the user is
encouraged to try to correct the interference by one or more of the following measures:
Power Sources
o
o
Lithium-ion polymer Rechargeable Battery
AC Power Adapter
„
Input (AC): 100–240V, 60Hz/50Hz
Output (DC): 9V, 1.5A
„
•
•
•
Power Consumption: ≤15W
Unit Dimensions (W x H x D): 206mm x 43mm x 160mm (8.1” x 1.7” x 6.3)
Unit Weights: 1.76 lbs (800 g)
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
* Specifications and features are subject to change without the prior notice. The weight and
dimensions are approximate.
•
Consult the dealer or an experienced radio / TV technician for help.
WARNING!
•
•
The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on apparatus.
Mains plug is used as the disconnect device. It shall remain readily operable and should
not be obstructed during intended use. To be completely disconnected, the apparatus
from supply mains, the mains plug of the apparatus shall be disconnected from the mains
socket outlet completely.
ADDITIONAL IMPORTANT INSTRUCTIONS
•
Place the apparatus with some distances from the nearby objects or walls for sufficient
ventilations. The ventilation should not be impeded by covering the ventilation openings
with items such as newspapers, table-cloths, curtains, etc.
•
•
•
No naked flame sources such as lighted candles should be placed on the apparatus.
Dispose of used batteries properly. Follow the local regulation for the battery disposal.
Use this apparatus in the moderate climates. It is recommended not to use this apparatus
such in a lightning storm.
25
24
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
PORTABLE DVD PLAYER
V11M11_IM_EN_10282009
TEL: 516-626-7188
FAX: 516-626-7105
© 2010 jWIN Electronics Corp. All rights reserved. No portion of this printed material or product
enclosed herewith including design, shape or graphics, may be reproduced or transmitted in
any form without the expressed written consent of jWIN Electronics Corp. by any means,
electronic or mechanical, including photocopying, recording or use of an information storage
and retrieval system. Any unauthorized distribution or reproduction of this printed material or
product, or any portion there of, will be prosecuted to the fullest possible extent of the law.
|